Built up Perspex logos.
Logos built into 3d using Perspex.
If you need your logo built up from Perspex we have the facilities to accurately machine and assemble your logo from any colour of acrylic material.
This built up Perspex logo is fitted with internal White led modules.
Built up Perspex logos- construction.
Built up Perspex logos are designed using the latest, sophisticated CAD software. We first machine the display face of the logo. All display faces have a lip machined onto the rear; this lip is designed to allow the side wall to mate "under" the display face. Manufacturing your built up Perspex logos in this way ensures you get a nice, flush finish on the display face.
The other method of mating the display face to the side wall is to machine a slot down the length of the side wall. When the side wall is formed around the logo perimeter it traps the face into the slot. The draw back to this method is that your display face must have a raised lip above it- a perfect place for dirt and debris to collect.
We think the lip strategy we employ makes for a better built up Perspex logo.
All faces are machined from 5mm thick Perspex for a stronger finish.
Side walls
Built up Perspex logo sidewalls are constructed from 3mm Perspex. Each side wall is precisely machined with scored bend points automatically placed in the correct location. By utilising scored bend points you can achieve a neater, more accurate set of bends.
The machined side wall is then formed to follow the perimeter of the 5mm logo face.
Built up Perspex logos- solid jointing.
The two sections of your built up Perspex logo are securely held in temporary clamps whilst we apply crystal clear acrylic cement to securely lock the two component parts together.
We only use approved acrylic cements as specified by Perspex and Plexiglas.
Built up Perspex logos- colours available.
You can specify your built up Perspex logos in virtually any colour or finish of Perspex. If you require back lighting please ensure you pick an acrylic which is suitable for this task- not every colour way can be back lit.
Built up Perspex logos can be made with matched face and side wall colours or in contrasting colours. Opal Perspex built up logos can also be manufactured ready for you to apply cut translucent vinyl's or digitally printed back lit films.
Built up Perspex logos with integral led illumination.
If you want to illuminate your built up Perspex logos we can manufacture matched led back trays. Made from 10 or 20mm White foam PVC material these back trays are fixed to the rear of the Perspex built up ready for installation.
Only quality branded acrylic are used for built up logo work.
Our standard branded range of acrylic materials are from the Perspex and Plexiglas range. Cast acrylic is preferable but built up logos can be made from extruded acrylic if this is what your specification requires.
The use of quality acrylic is critical as these ranges have superior colour tones and illuminate properly.
